EMail SupportWindows Support / Mac Support Support-Hotline: +1 (702) 997-7672

(emergency support 24/7/365 | user help Mon - Fri 8AM - 6PM PST)

Archives

1
May

PartnerTech A5 Setup Guide

Setting up your PartnerTech POS Terminal 1) Removing Back Cover Using a Phillips head screwdriver, Lift the protective covers and remove both screws holding the back plate in. Once both screws are removed the back plate should slide away from your terminal. 2) Plug in the Ethernet (LAN) Cable Please make sure to plug the ...
14
Aug

PartnerTech SP-5514 Setup Guide

This setup guide will walk you through the steps of setting up your PartnerTech SP-5514 terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction. Need Help?(Mon-Fri 9AM to 6PM Pacific Time) +1 (702)-997-7672 Setting up your PartnerTech POS Terminal 1) Remove Back Cover Using a Phillips head screwdriver, remove the ...
14
Aug

Aures Sango Setup

Setting up your Aures Sango Terminal. This setup guide will walk you through the steps of setting up your Aures Sango POS terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction. Need Help?(Mon-Fri 9:00AM to 6:00PM Pacific Time) +1 (702)-997-7672 1) Remove Side Cover Press the button on the back ...
15
Jul

Aures Yuno Setup

This setup guide will walk you through the steps of setting up your Aures Yuno POS terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction. Need Help?(Mon-Fri 9AM to 6PM Pacific Time) +1(702) 997-7672 1) Remove the Back Cover Please use the button at the bottom of the back cover ...
1
Jun

Epson TM Virtual Port Driver

How to install an Epson TM Printer using the virtual Port Driver Download Link for most Epson TMprinters: https://download.epson-biz.com/modules/pos/index.php?page=single_soft&cid=5010&scat=36&pcat=3 Download Link for TM-S9000MJ/TM-S2000MJ only: https://download.epson-biz.com/modules/pos/index.php?page=single_soft&cid=3811&scat=36&pcat=3 Download and install the Utility. Once the installation is finished, or after you start the utility, you'll see the following screen: If the System you are using has some actual physical COM-Ports, they'll ...