Email SupportWindows Support / Mac Support Support-Hotline: +1 (702) 997-7672

(emergency support 24/7/365 | user help Mon - Fri 8AM - 6PM PST)

Archives

4
Mar

Adding Devices to the POS Profile

By clicking +Add Device inside of POS Profiles, you can configure the Hardware or connected peripheral Devices. *Note: You can use the same POS profile on multiple Points of Sale if they all behave and connect similarly.  Adding a Receipt Printer When adding a new Receipt Printer you will want to press +Add Device the first ...
16
Apr

Entry Report

The Entry Report can be used to view what types of tickets have been redeemed or activated. This is only available with the Korona.Entry package. The data for this report is generated from Products sold w/ attached Ticket Definitions, and those Sold ticket products being Validated at an Entry Gate. Setting up Entry Report Parameters ...
1
Nov

Setup Complete – Congratulations

CONGRATULATIONS! You have successfully completed all the necessary steps required to setup and go live with KORONA.pos! SETUP COMPLETE Finalizing and Going LIVE With KORONAPrevious Step (Going Live With KORONA)Table Of ContentsExplore the KORONA Manual You are ready to go! If you're reading this page, you have completed all of the necessary steps required to setup ...
1
Nov

Quick Start – First Steps

Welcome to your new POS solution, KORONA POS Cloud! The following guide is provided to help you with your first steps into KORONA POS.  After creating your account and logging in for the first time, it is recommended to set up your point of sale. Progress Towards Completion Your First Steps Into KORONATable Of ContentsNext ...
1
Nov

Quick Start – Creating Cashiers & Users

Creating Cashiers & Users At this point, you should be ready to add Cashiers & Users to the system. Please note, that Cashiers & Users are handled differently in KORONA. This guide will give you a brief tutorial on creating both. Progress Towards Completion Creating Cashiers & UsersPrevious Step (Creating Products)Table Of ContentsNext Step (Creating ...
1
Nov

Quick Start – Data Transfer from Back Office to POS

Transferring Data from The Back Office to the POS Terminal Now that you have everything set up in the back office, you are ready to start testing configurations. Before you begin testing, you will need to synchronize your data with your POS Terminals. This is known as Retrieving Master Data. Follow the steps below to learn how ...
1
Nov

Quick Start – Testing Phase

Testing Phase Now that your back office is set up, and your terminals have your date, it is a good idea to do some testing. This is to ensure you have everything setup properly before you go live with KORONA. Progress Towards Completion Testing Transactions & FunctionPrevious Step (Transferring Data to the Terminal)Table Of ContentsNext ...
1
Nov

Quick Start – Going Live with KORONA

Completing Setup - Going Live with KORONA! All of your products, cashiers, commodity groups, everything should be ready to go now. Starting your live mode can be intimidating because suddenly things start to matter.  The following guide is intended to give you clarity on what is going to happen and what you should do prior to ...
1
Nov

Quick Start – Creating Buttons

Creating Buttons With your Products and Cashiers ready, you will now need to create buttons to be able to ring them up on the terminal. This guide will guide you through the basic steps to create buttons on your Korona Terminals. Progress Towards Completion Creating ButtonsPrevious Step (Creating Cashiers & Users)Table Of ContentsNext Step (Data ...
26
Oct

Quick Start – Commodity Group Setup

Creating Commodity Groups Now that your account has been created and activated, your next step is to set up Commodity Groups to sort your products into. This guide will provide a quick tutorial on creating your first commodity groups within KORONA. Progress Towards Completion Creating Commodity GroupsPrevious Step (First Steps)Table Of ContentsNext Step (Creating Products) What ...
Page 1 of 2