Archives

Setting up your PartnerTech POS Terminal 1) Removing Back Cover Using a Phillips head screwdriver, Lift the protective covers and remove both screws holding the back plate in. Once both screws are removed the back plate should slide away from your terminal. 2) Plug in the Ethernet (LAN) Cable Please make sure to plug the ...

This setup guide will walk you through the steps of setting up your PartnerTech SP-5514 terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction. Need Help?(Mon-Fri 9AM to 6PM Pacific Time) +1 (702)-997-7672 Setting up your PartnerTech POS Terminal 1) Remove Back Cover Using a Phillips head screwdriver, remove the ...

Setting up your Aures Sango Terminal. This setup guide will walk you through the steps of setting up your Aures Sango POS terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction. Need Help?(Mon-Fri 9:00AM to 6:00PM Pacific Time) +1 (702)-997-7672 1) Remove Side Cover Press the button on the back ...