Setting up your Aures Sango Terminal.
This setup guide will walk you through the steps of setting up your Aures Sango POS terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction.
1) Remove Side Cover
Press the button on the back of the side cover to release the cover and gently remove at an angle.
2) Plug in the Ethernet (LAN) Cable
Please make sure to plug in the network cable into the LAN slot below the USB 3.0 (Blue USB) ports.
3) Plug in the Printer via USB
The USB slot is located below the LAN slots. Also, make sure that the printer’s power cord is connected and plugged in.
4) Connect the Cash Drawer to the Printer
Locate the phone type jack on the printer and plug the cash drawer into that port.
NOTE: Location of the port may vary by make and model. Please consult your manual or call us if you experience any issues.
5) Connect the POS to the Power Outlet
Put the covers back on the POS and plug it into a power outlet. Then press the power button. Once the Korona POS Login Screen appears, you can log on using the code 1 (one).
(Mon-Fri 9:00AM to 6:00PM Pacific Time)