Category Peripherals

This will help you set up your Dejavoo Credit Terminal. Before getting started you must make sure that the Dejavoo device is boarded on the SPIN network platform, and you have been provided with your specific Dejavoo SPIN registerID and SPIN authKey. First, create a new device in the checkout profile. To do this, go ...

By clicking +Add Device inside of POS Profiles, you can configure the Hardware or connected peripheral Devices. *Note: You can use the same POS profile on multiple Points of Sale if they all behave and connect similarly.  Adding a Receipt Printer When adding a new Receipt Printer you will want to press +Add Device the first ...

The new inventory app allows you to process stock receipts, stock adjustments, store orders, dispatch notifications, count inventory or scan for product information. Logging Into The App First, you will need to initiate and load the app. You will be prompted with a login screen. Now login using your employee assigned login code, then you ...

Setting up your PartnerTech POS Terminal 1) Removing Back Cover Using a Phillips head screwdriver, Lift the protective covers and remove both screws holding the back plate in. Once both screws are removed the back plate should slide away from your terminal. 2) Plug in the Ethernet (LAN) Cable Please make sure to plug the ...

For usage in configuring Credit/Debit terminals through the Econduit payment Gateway service. Setting up Econduit Payment Terminals Start by navigating to Settings > POS Profile. From there scroll down until you see the + Add Device option. The device type is going to be Credit Terminal, and the device is going to be Econduit Credit Terminal. ...

Taking Credit Card Payments on PAX Machine Manually There are a few key elements needed when manually taking payments on a PAX machine. The needed information is card number, expiration date, and CVV  or CSC (3digits on the back, although sometimes it is a 4 digit number on the front). The card number is mandatory. However, you may ...

Using the Handheld Ticketing Devices Step 1) Power up the device.  The power button can be found at the top of the device. Once on, the Korona app should appear for you on the left bottom corner of the screen and it should be the only application located on the devices main screen. Step 2) ...

This setup guide will walk you through the steps of setting up your Korona POS terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction. 1) Remove the Sliding Cover To remove the cover, locate the arrow under the customer display screen under "Touch all-in-one". Slide your cover in the direction ...

In addition to the PAX terminals, Korona is also capable of working with the Genius provided by Cayan.  This guide will walk you through the process of setting up your Genius with Korona. Getting the Genius Terminal IP Address Before you begin working in the cloud, you will need to hookup the Genius device and ...

This setup guide will walk you through the steps of setting up your PartnerTech SP-5514 terminal. Please follow this guide closely to avoid damaging the equipment or peripheral malfunction. Need Help?(Mon-Fri 9AM to 6PM Pacific Time) +1 (702)-997-7672 Setting up your PartnerTech POS Terminal 1) Remove Back Cover Using a Phillips head screwdriver, remove the ...